PTFE Tape

FLONSTIK™ 100-HD

About PTFE Tape

FLONSTIK™ 100 HMS tape is a form of sintered and stretched PTFE (PolyTetraFluoroEthylene) with high temperature Silicone adhesive applied to one side. The stretched PTFE provides high tensile strength/modulus, lower elongation and higher dielectric strength than standard skived PTFE tape.

FLONSTIK™ 100 HMS PTFE tapes are widely used in electrical applications, e.g. the tight winding and wrapping of irregular shapes such as coils and cable harnesses where good insulation at high temperatures is required.

High Tensile Strength

Wide temperature range

High Temperature Silicone Adhesive

Pressure Sensitive Adhesion

PTFE Tape Features:

  • • Pressure sensitive adhesion/application
  • • High temperature performance
  • • Superior tensile properties
  • • Excellent thermal & dimensional stability
  • • Exceptional dielectric strength
  • • Unrivalled chemical resistance
  • • MIL Spec I23594C, Type1 / Revised Spec. AA59474

PTFE Tape Availability:

  • • Self wound, no backing liner
  • • Standard roll L33m
  • • Standard W457mm; can be slit from W6mm
  • • Supplied on standard 76mm cores

Technical Downloads

FLONSTIK™ 100 HMS PTFE Tape

  • Typical Properties/Standard Thicknesses
Property Test Method HD-1 HD-2 HD-3
PTFE thk (mm)
ASTM-D 374
0.050
0.076
0.127
Total Thk Incl.. Adh (mm)
ASTM-D 374
0.089
0.114
0.165
Adhesion (oz/in)
ASTM-D 1000
30
30
40
Elongation (%)
ASTM-D 1000
100
100
100
Tensile Strength (lb/in)
ASTM-D 1000
30
40
75
Dielectric Strength (V total)
ASTM-D 149
10,000
12,000
16,000
Temperature Range (°C)
-75 to 260
-75 to 260
-75 to 260
Temperature Range (°F)
-103 to 500
-103 to 500
-102 to 500

Need some expert advice?

Get in touch with our experienced team to discuss your Fluoroplastic requirements. Simply click the button below to send us a message or call us on +44 (0)1785 859 054.

Get in touch
Back to top arrow