+44 (0)1785 761344 or 
info@polyflon.co.ukPEEK tubing
PEEK tube, extruded from Victrex® virgin raw material, is well known for its very high degree of hardness even at elevated temperatures (+228°C). Coupled with this, PEEK tube enjoys resistance to extremely high pressures & in many cases has replaced stainless steel tube, particularly in High Pressure Liquid Chromatography (HPLC) applications. Due to its high purity, PEEK tubing does not leech out damaging “extractables” & is very effective in the trace analysis of complex fluids.
PEEK tube is flame retardant and exhibits very low smoke emissions lending itself well to wire & cable sleeving in aerospace applications. Being resistant to high doses of gamma & beta radiation, PEEK tube can used in nuclear reactor environments without becoming brittle.
Although the applications for PEEK tube are numerous we tend to manufacture & stock the standard HPLC tubing dimensions as detailed in the table below. Bespoke PEEK tubing sizes are well within our capabilities & we welcome any special requirement you may have.
Features & benefits of PEEK tubing
- Ultra hard material.
- Very good chemical resistance.
- Stable at temperatures up to +228°C.
- Excellent abrasion resistance.
- Flame retardant (UL94 V-0).
- Very tight dimensional tolerances possible.
Availability
| Part No. | ID x OD (Inches) | ID x OD (mm) |
|---|---|---|
| 4901000060 | - | 0.60×1.00 |
| 4901590013 | 0.005” x 1/16” | 0.13×1.59 |
| 4901590015 | 0.006” x 1/16” | 0.15×1.59 |
| 4901590018 | 0.007” x 1/16” | 0.18×1.59 |
| 4901590025 | 0.010” x 1/16” | 0.25×1.59 |
| 4901590050 | 0.020” x 1/16” | 0.50×1.59 |
| 4901590075 | 0.030” x 1/16” | 0.75×1.59 |
| 4901590100 | 0.040” x 1/16” | 1.00×1.59 |
| 4903180075 | 0.030” x 1/8” | 0.75×3.18 |
| 4903180159 | 0.062” x 1/8” | 1.59×3.18 |
| 4903180200 | 0.080” x 1/8” | 2.00×3.18 |
| 4906000400 | - | 4.00×6.00 |
- Supplied in continuous lengths up to 76m
- Available in natural (grey/brown) & striped or solid primary colours
- Custom/bespoke sizes are always possible.
Click here for printable version – PEEK tubing
The data listed falls within the normal range of product properties but they should not be used to establish specification limits nor used alone as the basis of design. Polyflon Technology Limited assumes no obligation or liability for any advice furnished by it or for results obtained with respect to these products. All such advice is provided gratis and the buyer assumes sole responsibility for the results obtained in reliance thereon.
Victrex® and PEEK™ are registered trademarks of Victrex plc.
